Your Rights and Obligations - DISCLAIMER

You Must Read This Section

By entering this site and using any circuit or description or other material presented, you explicitly accept the following. Should you choose not to read this information, this shall be deemed implicit acceptance of these terms and conditions in their entirety.

It is believed by Black Widow Audio (hereinafter referred to as BWA) and Dan Ward that the designs and articles presented are either original, in the public domain or may be considered common knowledge or based thereon, and do not violate the Copyright of any other party. This cannot be guaranteed however, and BWA, including but not limited to BWA's heirs or assigns, accepts no liability for loss or damages that may be imposed upon you by any Court of Law, statutory or other body should it transpire that a similar circuit has been simultaneously or previously designed, published or patented by another party. Nor shall BWA, including but not limited to BWA's heirs or assigns be held responsible for the failure of any project described to operate as described, loss or destruction of components or any other loss whether direct or consequential including loss of life or personal injury. It is entirely the reader's responsibility to determine the suitability of any design for the intended purpose. The projects are presented "as is" and are believed to be without error, however this cannot be guaranteed. If errors are found, please contact BWA and describe the error (and its consequences) so that corrections may be made. No design should be constructed before checking for updates, which may make a substantial difference to a design.

The above notwithstanding, all text, diagrams, circuits and any other material presented in these project and articles pages are Copyright (ã) BWA / Dan Ward unless otherwise stated. These circuits and descriptions are available for personal use only, and may not be used commercially without the author's written consent nor may the projects or articles presented be copied or directly linked to other sites or re-published in whole or in part in any form whatsoever whether electronic or otherwise without the author's written consent. Violators will be vigorously pursued by any and all means at my disposal.

Likewise, I will not knowingly use or misuse or otherwise falsely represent the intellectual property or original ideas of others, nor re-publish or link to circuits on other sites without the consent of the author of that site, other than as a reference to my published work. All references to the work of others is acknowledged in the article or project page where such references are made. Any omissions should be referred to BWA for correction.

Under no circumstances should any reader construct any mains operated equipment unless absolutely sure of his / her abilities in this area. The author / publisher / editor takes no responsibility for any injury or death resulting from, whether directly or indirectly, the reader's inability to appreciate the hazards of household mains voltages. All mains wiring should be performed by qualified persons only.

Copyright Notice. All projects and articles referred to herein, including but not limited to all text and diagrams, are the intellectual property of Dan Ward unless otherwise stated, and are Copyright (c) 2000-2001. Reproduction or re-publication by any means whatsoever, whether electronic, mechanical or electro-mechanical, is strictly prohibited under International Copyright laws. The author / editor (Dan Ward) grants the reader the right to use this information for personal use only, and further allows that one (1) copy may be made for reference and/or while constructing the project. Commercial use in whole or in part is prohibited without express written authorisation from Dan Ward and the owner of the copyright in the case of articles submitted by readers or reproduced with the permission of the original Copyright holder.

Page Updated

18 July 2001